ULTRAMAT AC/DC EQ
4
◎ ◎◎ ◎◎◎
◎ BOX CONTENTS
◎ SAFETY PRECAUTIONS
1. Do not attempt to charge incompatible types of rechargeable batteries. This charger is
designed to only charge and discharge Nickel Cadmium, Nickel Metal Hydride, Lithium
Ion, Lithium Polymer, and Lead Acid batteries.
2. Do not attempt to charge a dead or damaged battery.
3. 12V input from Pb battery or reliable 12V power supplier that can supply more than 7A
current is needed
4. Make sure to place the charger on a firm level surface for charging.
5. Do not attempt to charge batteries at excessive fast charge currents. Check with your
battery manufacturer for the maximum charge rate applicable to your battery.
6. Do not allow water, moisture or foreign objects into the charger and use in a well venti-
lated area
7. Do not place the battery or charger on or near a flammable object while in use. Keep
away from carpets, cluttered workbenches, etc.
8. Do not leave the charger unattended while charging. Disconnect the battery and remove
input power from charger immediately if the charger becomes hot and keep the charger
and battery cool down before reconnecting. Young children should be supervised to
ensure that they use the appliance safely
9. Do not disassemble the charger.
10. If lead-acid battery is used to charge battery, the battery terminal shouldn’t be contact-
ed to the chassis
11. Do not use automotive type battery chargers to power the charger.
12. Do not cover the air intake holes on the charger as this could cause the charger to
overheat.
13. Connect the input leads to a 12V power supply first, then connect the battery.
14. Do not attempt to charge non-rechargeable batteries.
15. Please comply with LiIon, LiPo, LiFe safety before charging
16. Do not use the damaged AC Power cord.
1. Charger 1EA
2. AC Power cord 1EA
3. Balance board 1EA
4. Balance cable 1EA
5. Charge cable 1set (RED/BK)
Содержание ULTRAMAT AC/DC EQ
Страница 20: ......