ULTRAMAT AC/DC EQ
9
- NiCd, NiMH charge
①
Go to Nixx mode
②
Press INC button to access to CHARGE mode
③
Press ENTER button shortly then the value of charge current blinks, press DEC/INC
buttons to set the desired value of charge current.
④
Press ENTER button then the value of delta peak blinks, press DEC/INC buttons to
set the desired value of delta peak.
⑤
Press and hold ENTER button to start charge battery.
⑧
Press INC button to access to CYCLE mode and press INC/DEC button to charge/dis-
charge sequence and repeating number and then press ENTER button to remove the
curser blinking.
⑨
Press INC button to access STORE mode and press INC/DEC buttons to set charge/
discharge and then press ENTER button to remove the curser blinking.
⑩
Press INC button to access to BLANCER mode and check if the setup is correct.
◎ NiCd, NiMH BATTERIES CHARGE/DISCHARGE
LiPo
C=3.0A
LiPo
C=3.0A
LiPo
(03)CELL
CYCLE D->C1
D=1.0A
STORE
D=1.0A
BALANCER
START
Profile
Nixx
5S
Nixx
C=3.0A
Nixx
C=3.0A
Nixx
C=3.0A
[01]
3000
CHARGE
d=25mV/c
CHARGE
d=25mV/c
CHARGE
d=25mV/c
BATTERY
PLEASE
CHECK
WAIT....
Содержание ULTRAMAT AC/DC EQ
Страница 20: ......