4
batteries of this type do not reach full capacity until they have been charged and
discharged (cycled) several times.
You will need two suppressor filters, Order No. 1040, to connect the aileron servos to
the receiver, and two further extension leads, 100 mm and 180 mm long. For shock
protection the receiver and receiver battery should be packed in soft foam, e.g. foam
rubber, Order No. 1637.
Adhesives
White glue, e.g. UHU coll, Order No. 958.60
Cellulose cement, e.g. UHU hart, Order No. 534.35
Cyano-acrylate (“cyano”), e.g. Order No. 5822
Thread-lock fluid, e.g. Order No. 952
Accessories required for the glow engine version
(not included)
Synthetic oil-based fuel, to suit engine
Fuel filter, e.g. Order No. 1650.1
Fuel tubing, e.g. Order No. 1643
Manual fuel pump, e.g. Order No. 1610
Glowplug battery with glow clip, e.g. Order No. 3253
Electric starter, e.g. Order No. 1628
Starter battery, e.g. Order No. 2592
Accessories required for the electric-powered version
(see table)
See the main FS catalogue for details of battery chargers
Tools required
(not included)
Set of cross-point screwdrivers, flat-nose pliers, side-cutters, balsa knife or razor
blade, set of twist drills, universal glowplug spanner, soldering iron.
Please don’t start assembling the model until you have checked the kit components
and the building instructions, and are familiar with the construction procedure. If you
are not happy with any component, kindly return it to your model shop without delay.
