background image

 

19 

Safety notes and warnings relating to model aircraft powered by internal-

combustion engines 

 

Be sure to read right through the instructions covering assembly and operation 
of your model before you attempt to operate it for the first time. 
 
These  safety  notes  are  an  integral  part  of  the  instructions.  Please  keep  them 
and the operating instructions in a safe place. If you ever dispose of the model 
be sure to pass them on to the new owner. 
 
Powered  model  aircraft  are  very  demanding  and  potentially  dangerous 
machines,  and  call  for  a  high  level  of  technical  knowledge  and  skill  from  the 
operator, together with a responsible attitude. 

 
Powered  model  aircraft  are  not  suitable  for  young  persons  under  eighteen 
years of age. 
 

Young  people  should  only  be  permitted  to  operate  this  model  under  the 
instruction and supervision of an adult who is aware of the hazards involved in 
this activity. 
 
The  operator  of  the  model  must  be  in  full  possession  of  his  or  her  bodily  and 
mental  faculties.  As  with  car  driving,  operating  a  model  aircraft  under  the 
influence of alcohol or drugs is not permissible under any circumstances. 
 
Radio-controlled model aircraft may only be employed for the purpose intended 
by the manufacturer. They must never be used as man-carrying machines. Any 
other use of this model is prohibited. 
 
A  radio-controlled  model  aircraft  can  only  work  properly  and  fulfil  your 
expectations  if  it  is  built  very  carefully  and  in  accordance  with  the  building 
instructions. Do not make any modifications of any kind to the design features 
or  materials.  If  you  wish  to  avoid  injuring  people  and  damaging  property  it  is 
essential  to  be  careful  and  painstaking  at  all  stages  of  building  and  operating 
your  model.  Nobody  would  climb  into  a  full-size  light  aircraft  and  try  to  fly  it 
without completing a course of training first. Model flying is a skill which has to 
be  learned  in  just  the  same  way.  We  suggest  that  you  ask  for  help  from  an 
experienced  model  flyer,  or  join  a  model  club  or  flight  training  school.  Your 
local model shop and the model magazines are good sources of information. 
 
It  is  fundamentally  essential  to  set  the  Centre  of  Gravity  (C.G.)  and  control 
surface travels correctly. Adjust the model until they are exactly correct. 
 

 

Radio control system: satisfy yourself that your frequency is vacant before 
you  switch  on.  Check  your  RC  system  regularly  as  its  components 
eventually  wear  and  need  to  be  replaced  or  repaired.  Radio  interference 
caused by unknown sources can occur at any time without warning. If this 
should  happen,  your  model  will  be  uncontrollable  and  completely 
unpredictable.  Never  leave  your  radio  control  system  unguarded,  as  other 
people  might  pick  it  up  and  try  to  use  it.  Your  RC  system  can  only  work 
reliably if the batteries are kept fully charged. 

Содержание TAXI SPORT II

























Отзывы: