GRAUPNER POLARON EX-1400 Скачать руководство пользователя | Manualshive

Страница: 11 / 56

background image

Eng

lish

INNOVATION & TECHNOLOGIE

10

11

Intended use

The Graupner Polaron EX-1400 you have acquired is a professional product with superior proper-
ties. By using advanced semiconductor technology and a powerful microprocessor with superior
charging characteristics, simple operation and optimum reliability are achieved.
With the Graupner Polaron EX-1400 it is possible to charge all model batteries such as: Nickel
Cadmium (Ni-Cd), Nickel-Metal Hydride (Ni-MH), Lithium Polymer (LiPo), Lithium Ion (Lilo), Lithi-
um Iron (LiFe), Lead-Gel and Lead-acid (Pb).
Connect the charger to a car battery or preferably to a power supply with a stabilized direct current
output of 12 ... 24 V and 25 A output power (recommended Order Nr. S2012). Please note: If the
supply voltage drops below 23 V, the maximum possible power of the charger is not reached (see

also section „Technical specifications“ on page 13).

NOTE

It is important to observe the charge instructions of the battery manufacturer and observe
the recommended charge currents and charge times. Only batteries which are expressly

suitable for high charge currents should be charged quickly! Please keep in mind that new batter-
ies do eventually reach their full capacity after several charge/discharge cycles, and can result in
premature charge cutoff. Make sure after several charges of the proper and reliable operation of
the automatic charge termination circuit and the charged capacity.

!

ATTENTION!

Obey all safety messages in this manual. They contain important information on handling
the product. You are responsible for the safe operation of the product! Not following the

manual and safety instructions will void the warranty.

They are required different connectors with several requirements in the use and application of
rechargeable batteries of different kind. Note that connectors, connector names and polarities of
other manufacturers may be different. Therefore, use only genuine matching connectors of the
same design.

Also, use only original charging cable with sufficient cross-section.

Care and maintenance

P

The charger is maintenance-free and requires no maintenance. However, please protect it
in your own interest from dust, dirt and moisture!
Disconnect the car battery and battery for cleaning the charger, and use only a dry cloth

lightly rub (do not use cleaning agents).

«
...
9
10
11
12
13
...
»

Содержание POLARON EX-1400

























































Отзывы:

Нет отзывов

Похожие инструкции для POLARON EX-1400

Volt CPAP Battery Pack

Бренд: Viverity Страницы: 2

UPS 3U Extend Run

Бренд: IBM Страницы: 14

Бренд: Sunforce Страницы: 1

Бренд: Ratio Electric Страницы: 40

PowerLuber C Series

Бренд: Lincoln Страницы: 2

Бренд: Radio Shack Страницы: 4

PowerArc ArcField PF2009

Бренд: Spigen Страницы: 17

Бренд: EarthX Страницы: 22

Бренд: AA Portable Power Corp Страницы: 2

Бренд: XENES Страницы: 24

Бренд: XD COLLECTION Страницы: 20

XD P324 61X Series

Бренд: XD COLLECTION Страницы: 36

Бренд: XD COLLECTION Страницы: 28

Бренд: CLAS Страницы: 24

Бренд: Radio Shack Страницы: 10

Бренд: Jegs Страницы: 4

Бренд: KICK ASS Страницы: 20

Бренд: Exide Страницы: 10

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды