21 / 36
33032_jp_V1
Brake spring and ratchet
Locate the screws indicated by a white circle in the picture.
The outboard screw of the two marked in the figure adjust the
braking force.
The inboard screw adjusts the strength of the ratchet for the
respective control stick.
Note
The right control stick gimbal is specular to the left one, so that here
the screws are located left on the top side.
Control sticks centering force
The control sticks' restoring force can also be adjusted. The
adjustment is located next to the return springs.
By turning the respective adjust screw the spring force can be
adjusted.
Right turn = return harder
Left turn = return softer
Brackets for transmitter belt
A stable transmitter hanger for fastening neck straps is standard
equipment on the
mc-32 HoTT
transmitter.
Installing the metal brackets:
Push both brackets inward a bit near where they are engraved.
Turn them upward by 90 °. The brackets will automatically lock
into position.
If you have a neck strap fastened to the holder bracket with key-
rings, first press lightly on the right holder bracket to release its
latch. So it can be folded down. Use the same procedure for the
left bracket.
Afterward push both brackets simultaneously into the recess.
vertical
horizontal
Содержание mc-32 HoTT
Страница 1: ...Manual part 1 mc 32 HoTT No 33032 Manual EN 1 2 3 4 7 5 6 8 1 2 3 4 7 5 6 8...
Страница 2: ...2 36 33032_jp_V1...
Страница 35: ...35 36 33032_jp_V1...
Страница 36: ......