GRAUPNER mc-32 HoTT, Руководство пользователя

Страница: 16 / 36

16 / 36
33032_jp_V1
ATTENTION!
When your transmitter is directly connected to a desktop computer
by a connecting cable (DSC cable) and/or a computer interface is
connected to your simulator, the transmitter may be destroyed
by electrostatic discharge. This type of connection should therefore
only be used if you protect yourself from electrostatic discharge
while operating the simulator by wearing a commercially available
grounding armband. Graupner therefore strongly recommends only
using wireless simulators.
Memory cards
Micro SD cards up to 2 GB and micro SDHC up to 32 GB are
compatible memory cards.
Our recommendation: For a normal use a memory card with a
storage capacity of up to 4 GB is sufficient.
Inserting and removing the memory card step by step:
Switch off the transmitter.
The memory card slot is located in the left provided connections
of the transmitter.
To insert:
Push the SD card as deep as you need to win the spring resis-
tance of the slot.
To remove:
Push the SD card slightly toward the card slot to unlock it and
then remove it.
The included memory card is ready for use as soon as the trans-
mitter is switched on. In the display appears the symbol of a
memory card.
Otherwise, folders are created on the memory card ( repre-
sented in the transmitter display by a permanent filling from left
to right memory card). When the animation finishes, the inserted
memory card is ready for use.
You can connect the memory card to your PC by using a mem-
ory card reader. Copy the data downloaded from the transmitter
page on the web site in the related folder of the memory card.
Insert the memory card in your transmitter.
Data recording/Data saving
The data recording in the SD card is linked to the flight timer. If
it is started, the data recording starts as well and it stops when
the flight timer is stopped.
The data writing on the memory card is remarked by the symbol
of the "filling" of the memory card with black from left to right.