30 / 36
33032_jp_V1
Firmware update step by step:
Move with a short pressure on the SET key to the selection page
of the option "FIRMWARE UPDATE".
Select the firmware version with the selection keys.
Confirm by pushing the SET key.
The storing in the transmitter memory will start:
When the counter reaches the storing amount the storage pro-
cess is finished and the message "Firmware upgrade success!"
appears. The transmitter reboots and it is ready for use.
Stick calibration
If the center position of your self-neutralizing control stick does
not precisely correspond to 0% control travel, you can check
and correct it as follows:
Stick calibration step by step:
Move to the "Model select" menu and initialize a free model
memory.
Move to the "Servo display" menu, pressing simultaneously the
keys in the left touch pad,
without
any interim change to trim
settings or other program settings.
In this menu point you can check if your sticks are correctly cen-
tered. Bring then all the sticks in the middle position.
One after the other, put both sticks into each of their four pos-
sible limit positions without exerting force at the limit position
and check if the value are between -100% and +100%. For
example, if control 2 is at its right limit and the other three other
control stick functions are in their respective middle positions,
then your transmitter's display should look like the one shown
on the left.
Regardless of the number of self-neutralizing control stick func-
tions available on your transmitter, if these checks produce four
0% results and eight 100% results, then your transmitter's con-
trol sticks are optimally calibrated. You can terminate this pro-
cess and then, if appropriate, delete the model memory just cre-
ated.
If you note that the sticks do not reach the desired values, move
to the "Stick calibration" line in the "HIDDEN MODE" menu and
tip on the SET key.
The flashing arrows indicate in which direction you have to push
the sticks.
Confirm by pushing the SET key.
With the selection keys
of the right touch pad allow you to
Firmware Download
Process Start
Please Wait....
Boot Download
Success!!!
Please Wait....
Firmware
Downloading...
Progress 023/208
1
3
5
7
9
11
13
15
–100
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
2
4
6
8
10
12
14
16
Содержание mc-32 HoTT
Страница 1: ...Manual part 1 mc 32 HoTT No 33032 Manual EN 1 2 3 4 7 5 6 8 1 2 3 4 7 5 6 8...
Страница 2: ...2 36 33032_jp_V1...
Страница 35: ...35 36 33032_jp_V1...
Страница 36: ......
