• MIXER
5 Mixer, 1 ~ 5, at the same time programmable.
• MASTER CH
MIXER input channel: Channel whose value is mixed to the output channel
•
0: Mixer Off
1 ~ 6: input channel mixer
• SLAVE CH
MIXER output channel: The signal is output on this channel
0: Mixer Off
1 ~ 6: Mixer output channel
• Trim
Offset value of the mixer.
Trim range: -30 ~ 0 ~ +30
• Travel -
Sets the lower limit fixed for the output channel.
range: -100 ~ 0 ~ +100
•
Sets the upper limit fixed for the output channel.
range: -100 ~ 0 ~ +100
RX FREE MIXER <
>MIXER: 1
MASTER CH: 0
SLAVE CH: 0
TRIM: 0%
TRAVEL-: +100%
: +100%
•
The antenna of this device has to keep in operation at least 20 cm away from
people. We therefore do not recommend to use than 20cm from the device at a
smaller distance.
•
Make sure that no other station is closer than 20cm to avoid adverse effects on the
electrical properties and the dispersion of the system.
•
The remote control may not be operated until the country setting of the transmit-
ter was set correctly. This is necessary to meet the requirements of the various
directives - to meet - FCC, ETSI, CE, KC, etc.. Details of this procedure, refer to
the instructions for your particular transmitter and receiver.
•
Before each flight, all systems and run at least a full range test on the ground th
-
rough to identify and fix all the bugs in the system and / or the programming model
before the flight.
ATTENTION!
Seite 4 Graupner S/J
(For detailed instructions, see www.graupner.de)
