GRAUPNER 9521, Инструкция по сборке

Страница: 32 / 39

GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY
32
Keine Haftung für Druckfehler. Technische Änderungen vorbehalten! ID# 0058880 01/2008
Parts List
Part Description
No. off Material Dimensions and thickness in mm
1 Rear fuselage reinforcement 2 Depron® Laser-cut, 3 mm thick
2 Front fuselage reinforcement 2 Depron® Laser-cut, 3 mm thick
3 Elevator 1 Depron® Laser-cut, 3 mm thick
4 Rear fuselage centre section 1 Depron® Laser-cut, 3 mm thick
5 Left wing 1 Depron® Laser-cut, 3 mm thick
6 Right wing 1 Depron® Laser-cut, 3 mm thick
7 Left aileron 1 Depron® Laser-cut, 3 mm thick
8 Right aileron 1 Depron® Laser-cut, 3 mm thick
9 Battery compartment side 2 Depron® Laser-cut, 3 mm thick
10 Battery compartment floor 1 Depron® Laser-cut, 3 mm thick
11 Wing reinforcement 2 Carbon strip 3 x 0.5 x 1000 mm
12 Top wing leading edge doubler 1 Depron® Laser-cut, 3 mm thick
13 Bottom wing leading edge doubler 1 Depron® Laser-cut, 3 mm thick
14 Motor mount 3 Plastic Inj. moulded
15 Top fuselage section 1 Depron® Laser-cut, 3 mm thick
16 Self-adhesive glass fibre tape Order No. 98709 Length and width as required
17 Front fuselage centre section 1 Depron® Laser-cut, 3 mm thick
18 Bottom wing leading edge doubler 1 Depron® Laser-cut, 3 mm thick
19 Top wing leading edge doubler 1 Depron® Laser-cut, 3 mm thick
20 Lower left fuselage reinforcement 1 Depron® Laser-cut, 3 mm thick
21 Lower right fuselage reinforcement 1 Depron® Laser-cut, 3 mm thick
22 Upper fuselage reinforcement 2 Depron® Laser-cut, 3 mm thick
23 Bottom fuselage section 1 Depron® Laser-cut, 3 mm thick
24 Rudder 1 Depron® Laser-cut, 3 mm thick
25 Double-sided control surface horn 3 Plastic Inj. moulded
26 Hinge lug 6 Plastic Inj. moulded
27 Propeller pitch pushrod 2 Steel wire 0.8 Ø x 60 mm
28 Aileron stop 2 Depron® Laser-cut, 3 mm thick
29 Motor mount adaptor 3 Plastic Inj. moulded
30 Retaining screw 3 Steel M2.0 x 8 mm
31 Linkage cord 1 Plastic 0.06 Ø x 5000 mm, as required
32 Undercarriage leg 2 Carbon strip 300 x 6 x 1 mm
33 Wheel axle support 2 Plastic Inj. moulded
34 Undercarriage fairing 2 Depron® Laser-cut, 3 mm thick
35 Wheel axle 2 Plastic Inj. moulded
36 Wheel spat mount 2 Plastic Inj. moulded
37 Wheel spat 2 Depron® Laser-cut, 3 mm thick
38 Main wheel 2 30 mm Ø