manualshive.com logo in svg

GRASS VALLEY NV9641A, Руководство пользователя

Поделиться
Скачать
GRASS VALLEY NV9641A Скачать руководство пользователя страница 49

39

NV9641A

User’s Guide

Tally (GPIO) Window

Below the tree window is the tally section of the configuration page. 

It has two sections: inputs and outputs. By clicking on one of the input or output buttons, you 
can configure the input or output. 

(The NV9641A has no actual tally buttons. It does have a DB25 connector at the rear. The 
buttons are present in the configuration page to allow you to configure the tally interface.)

If you are interested in configuring the tally interface, read Chapter 6, 

GPIO

, on page 73.

Selection Buttons 

Selection buttons are available only under the XY/MD model. 

Selection buttons have several functions:

•

Select levels in X-Y mode. 

•

Select MD destinations in MD mode.

•

Provide feedback (e.g., current source, preset source, and destination mnemonics, and 
breakaway and lock status) when the operator is performing takes. 

Selection buttons are configured with (1) a display index in the range 1–8 and (2) an MD destina-
tion device name. (Either of those items could be ‘none’. However, if the display index is ‘none’, 
the button will be unusable.) 

You should configure at least one selection button (for feedback). We recommend that you 
configure 

exactly 8

 selection buttons (on any particular button page).

Although you can place any number of selection buttons on a given page, the NV9641A can use 
only 8. Selection buttons beyond that will duplicate other selection buttons. Selection buttons 
scroll through levels in X-Y mode or through MD destinations in MD mode. To scroll, the oper-
ator presses the up/down buttons. 

The selection buttons scroll 

modulo the number of buttons

 present on the button page. For 

example, if the page has 5 selection buttons, scrolling will cause the selection buttons to repre-
sent, and show, MD destinations 1–5, then 6–10, and 11–15 and so on. In X-Y mode, the 
selection buttons would represent, and show, levels 1–5, then 6–10, and 11–15 and so on, 
subject to the number of levels defined for a given destination. 

Sometimes certain levels or MD destinations are undefined. The selection buttons for unde-
fined levels or undefined MD destinations appear dark. 

Selection (of levels or MD devices) is affected by ‘Hold’ mode. (See the 

Hold

 button, page 29.) 

The user may toggle Hold mode at any time. Using the selection buttons follows hold mode or 
normal mode, whichever is in effect at the moment. Normal mode is the default

 

—

 

unless you 

specify otherwise in the 

Panel Options

.

Содержание NV9641A















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды