GRASS VALLEY NV9641A Скачать руководство пользователя страница 29

Страница: 29 / 110

NV9641A

User’s Guide

Panel Options

The first panel option selects the behavioral model of the panel:

XY/MD

paging

. The panel

options differ between the two models. The default model is XY/MD mode.

Changing from one behavioral model to the other will erase the panel configuration. A confir-
mation warning appears when you make the change:

Options under XY/MD Model

This is the top part of the panel options section, as it appears at the right of a configuration page
under the XY/MD model:

Drop-Down Menus

These are its options:

Panel Behavior
Model

XY/MD Mode

The panel configuration uses the XY/MD model.

XY/MD supports a tree of button pages and allows the operator
the choice of X-Y mode (multiple levels, single destination) or MD
mode (all levels, multiple destinations) at any time.

Paging Mode

The panel configuration uses the paging model.

Paging uses an ordered list of button pages and does not support
X-Y mode or MD mode. The paging model supports a limited X-Y
mode.

Default Mode

X-Y Mode

Starts the panel in XY mode after a reset.

Multi-Dest Mode

Starts the panel in Multidest mode after a reset.

Release Mode

Normal Release

This panel can release “locks” and “protects” set by the designated
user (at this panel or any other panel).

Force Release

This panel can release locks and protects set by any user.

Содержание NV9641A















































































































Результаты поиска

Содержание NV9641A

Отзывы:

Бренды по названию

Популярные бренды

GRASS VALLEY NV9641A, Руководство пользователя

Результаты поиска

Содержание NV9641A

Отзывы:

Бренды по названию

Популярные бренды