manualshive.com logo in svg

GRASS VALLEY NV9641A, Руководство пользователя

Поделиться
Скачать
GRASS VALLEY NV9641A Скачать руководство пользователя страница 30

20

Configuration

Panel Options

Default 
Destination

None

After a reset, the panel displays no destination device. (This is not 
recommended.)

‹device›

The Panel uses the specified device as the destination after a reset. 
(The ‘Default State’ button also returns the panel to this destina-
tion.)

Preset Monitor

None

The preset source video is not sent to a monitor. 

‹device›

The preset source video for the selected destination appears on 
the specified monitor (device).

Status Monitor

None

The current source video is not sent to a monitor. 

‹device›

The current source video for the selected destination appears on 
the specified monitor (device).

XY Data 
Routing Mode

Automatic

If a machine control (i.e., data) level is involved in a route, the sys-
tem makes the route on the control level even if the control port is 
in use on the source or destination device. It breaks the previous 
control connection and then makes a new control connection for 
the route in progress.

Semi-automatic 
(recommended)

If the control port is in use for the source or destination device, the 
system takes all (selected) levels except control and allows the 
operator to perform the control level route by pressing ‘Take’ a sec-
ond time. The operator may cancel the control-level take by press-
ing a button other than ‘Take.’ 

If the control port is not in use, the control level take occurs nor-
mally. 

Manual

If the control port is in use for the source or destination device, the 
system takes all (selected) levels except control. It 

does not

 per-

form the control level route. 

If the control port is not in use, the control level take occurs nor-
mally. 

To carry out a take on a machine control port that is in use, the 
operator must first free the port by performing a “tristate” take on 
the port, that is, taking the device (as a source) to itself (as a desti-
nation) on the control level. 

A take can occur on the machine control level if, on the selection 
button for the control level, the status line is “FREE.”

Содержание NV9641A















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды