GRASS VALLEY LDX 150, Руководство пользователя

Страница: 135 / 185

117
LDX 150
User Guide
Source XCU,
Ethernet
, IS-07,
Serial
0 O Select source for the tally signal.
On Air Lamp
Enable
, Disable 0 O Select Enable when the On Air Lamp/Tally light at the
front of a large viewfinder should follow the tally signal
or select Disable if you never want it to light.
On Air Lamp Lvl 0..99
(99)
0 - Sets brightness level of the On Air Lamp/Tally light at
the front of a large viewfinder.
On Air Handgrip
Switch
, Input, Off 0 - ???
Aux out Off,
On
0 - ???
Lock Off,
On
3 - Switches the Tally Lock function on or off. When Tally
Lock is on, some camera controls are locked when the
camera is On Air.
SDI embedding
Off
, On 3 - ???
CAWB Settings
CAWB Speed 1..40
(4)
S - Sets the speed for the Auto White Balance procedure.
CAWB Gain 1..40
(10)
S - Sets the gain value for the Auto White Balance
procedure.
Network
Camera Number 1..99
(1)
0 - Selects logical camera number.
IP Settings
IP Mode DHCP,
Auto
, Manual 0 - Selects automatic, manual or DHCP IP mode for C2IP
network.
Subnet Mask 0..31
(0)
0 - Selects the subnet mask (when IP mode is set to
manual).
IP <IP address> 0 - Sets camera IP address in the C2IP network (when IP
mode is set to manual).
Def GW <GW address> 0 - Selects camera head default gateway IP address
in the C2IP network (when IP mode is set to manual).
Apply Settings Exec, .... 0 - Select Exec to apply the new IP settings.
Nameserver 1
Use Server No , Yes 0 - Select Yes to enable use of the C2IP Name Server 1
Note: Nameserver license must be installed on the
Camera Connect.
Status Off , Unknown, Active,
Unavail
0 - Shows currrent status of Name Server 1
IP <IP address> 0 - Selects Name Server 1 IP address.
Apply Settings Exec, ... 0 - Select Exec to apply the new IP settings
Nameserver 2
Use Server No , Yes 0 - Select Yes to enable use of the C2IP Name Server 2
Note: Nameserver license must be installed on the
Camera Connect.
Function: Values: U: F: Description: