GRASS VALLEY LDX 150 Скачать руководство пользователя

Страница: 8 / 185

viii

Notices

Safety and EMC Standards

This equipment complies with the following standards:

Safety Standards

IEC62368-1:2018

Audio/video, information and communication technology equipment: part 1

EN 62368-1:2018

EU national deviations.

EMC Standards

This unit conforms to the relevant Union harmonization legislation and the requirements of

the following directive/standards:

RED 2014/53/EU

FCC / CFR 47:Part 15 (Class B)

Federal Communications Commission Rules Part 15, Subpart B
Caution to the user that changes or modifications not expressly approved by the party

responsible for compliance could void the user's authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following

two conditions: (1) this device may not cause harmful interference, and (2) this device must

accept any interference received, including interference that may cause undesired

operation.

Note

+ ☞

Note

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation.

EMC testing;

EN 301 489-1 V2.2.3, EN 301 489-3 V2.1.1 and EN 301 489-19 V2.1.1.

EN 62311:2020N

Radio testing; EN 303 413 v1.1.1 (GPS)

Radio testing; EN 300 330 v2.1.1 (NFC)

Содержание LDX 150


























































































































































































Результаты поиска

Содержание LDX 150

Отзывы:

Похожие инструкции для LDX 150

Бренды по названию

Популярные бренды

GRASS VALLEY LDX 150, Руководство пользователя

Результаты поиска

Содержание LDX 150

Отзывы:

Похожие инструкции для LDX 150

Бренды по названию

Популярные бренды