GRASS VALLEY LDK 5490, Руководство пользователя

Страница: 116 / 136

5-2 HD video mode Viper
Physical set-up
The Viper can be tripod-mounted or operated from the shoulder.
Attach all accessories to the camera as described in Section 2 or as
described by the manufacturer. Connect the camera to the recording
system or directly to the post-production facility.
Power
If using an external power source connected to the power input
socket at the back of the camera, switch to the external source.
Set the power switch on the left side of the camera to the On
position.
Functional set-up
The camera uses an electronic viewfinder. Text messages giving
information about the camera status are superimposed on the
viewfinder picture. The viewfinder is also used to display a menu-
style control system. This menu give access to the camera functions.
When you first use the camera, you should enter the menu system
to check and, if necessary select, the operational mode that you wish
to work in and to set up your personal preferences. Refer to Section
6 - Operating the Menu System which explains how to use the menu
system.
The menu system has 3 user levels. If the level is set too low, you
may not have access to all the available functions. The owner card
or the PIN code is used to set the user level in the
Security menu.
For full control, set the level to 3.
Mode selection
The operational mode is selected in the Install menu. Check that
the output mode item is set to R, G, B or Y, Cr, Cb. Then select the
format you want - 1080p or 720p. If you select 1080p, you can then
select the aspect ratio - 16:9 or SW (cinemascope).
Setting up the camera