manualshive.com logo in svg

GRASS VALLEY KULA, Руководство по установке

Поделиться
Скачать
GRASS VALLEY KULA Скачать руководство пользователя страница 2

ii

Notices

Related Products

This Installation Manual Covers:

• Kula IP Mainframe and Control Panels and Ancillary Panels

• Kula SDI Mainframe and Control Panels and Ancillary Panels

• Kula 12G-SDI Mainframe and Control Panels and Ancillary Panels

FCC Compliance

In order to comply with FCC/CFR47: Part 15 regulations, it is necessary to use high-quality, 
triple-screened Media or Monitor cable assemblies with integrated ferrite suppression at 
both ends.

Patent Information

This product may be protected by one or more patents.

For further information, please visit: 

www.grassvalley.com/patents/

Copyright and Trademark Notice

Grass Valley

®

, GV

®

 and the Grass Valley logo and/or any of the Grass Valley products listed 

in this document are trademarks or registered trademarks of GVBB Holdings SARL, Grass 
Valley USA, LLC, or one of its affiliates or subsidiaries. All other intellectual property rights 
are owned by GVBB Holdings SARL, Grass Valley USA, LLC, or one of its affiliates or 
subsidiaries. All third party intellectual property rights (including logos or icons) remain the 
property of their respective owners.

Copyright © 2017 - 2020 GVBB Holdings SARL and Grass Valley USA, LLC. All rights reserved.

Specifications are subject to change without notice.

Содержание KULA












































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды