GRASS VALLEY KAM-SD-2AES, Инструкция по эксплуатации

Страница: 62 / 74

62 KAM-SD-2AES-MUX Instruction Manual
KAM-SD-2AES-MUX Links and Web Pages
Slot Configuration
Use the Slot Config web page ( Figure 42 on page 63 ) to:
• Assign an appropriate name to the module slot,
• Assign an Asset Tag identification,
• Enable/disable the Locate Module function,
• Save module configuration and enable slot memory,
• Check SNMP related 2000NET module switch settings, and
• Enable/disable SNMP reporting for the specific Kameleon slot.
Slot Identification
You may identify the module by typing a specific name in the
Name
field.
The assigned name is stored on the 2000NET module and travels with the
2000NET module if it is moved to another frame. Select
Default
to enter the
factory default module name.
An asset identification may be entered in the
Asset Tag
field. This will appear
on the module Status web page and in the NetConfig inventory report.
Locate Module
When enabled by selecting the
Flash
pulldown, the
Locate Module
function
flashes the yellow COMM and CONF LEDs on the front of the module to
make it easy to locate in the frame (see
Operation Indicator LEDs on page 14 ).
Slot Memory
The slot configuration for each media module is automatically saved peri-
odically to the 2000NET module in that frame. You may also select the
Learn
Module Config
button at any time to save the current configuration for this
slot. The configuration is saved on the 2000NET module. If the 2000NET
module is removed or powered down, the stored configurations are not
saved.
When the
Restore upon Install
box has been checked, the current configuration
saved to this slot is saved as slot memory. When the current module is
removed and another module of the same type is installed, the configura-
tion saved to the 2000NET module will be downloaded to the new module.
The box must be checked before the current module with the saved config-
uration is removed.
Use
this
link