KAM-SD-2AES-MUX Instruction Manual
23
Initial Configuration Process Overview
Initial Configuration Process Overview
To configure the Kameleon module proceed as follows:
1.
Go to the
I/O Config
web page to setup and name inputs and outputs.
2.
If not already connected, connect all input and output signals. Go to the
module
Status
web page to verify component and signal presence and
condition.
3.
Go to the
Video Input Select
web page to configure the video source and
output timing source.
4.
Go to the
MUX
web page if you are multiplexing audio into the output
video signal.
5.
Go to the
Functional View
web
page to:
•
Verify the module’s functional configuration is correct, and
•
Begin with the Input block links to configure each function in turn.
Note
Next, Functional View, and Back links are provided to help you navigate
through a logical configuration sequence.
6.
Use
E-MEM
memory to store or recall configurations as necessary.
