USER MANUAL
HCO-3931 |
21
Icon 4
– Input BACKUP status
A: Green - Status OK
B: Red
– Error
C: Grey
– No analysis performed
Icon 5
– Input EMERGENCY1 status
A: Green - Status OK
B: Red
– Error
C: Grey
– No analysis performed
Icon 6
– Input EMERGENCY2 status
A: Green - Status OK
B: Red
– Error
C: Grey
– No analysis performed
Icon 7
– Operating Mode
A: Bypass not active
– switch operational
B: Bypass activated
C: Test Pattern
Icon 8
– Card Heath status
A: Green - Fan OK and GPIO Power OK
B: Red - Fan error or GPIO Power Error
When an icon shows an error state, a message describing the error will appear beneath the icons. If there is more
than one error, they will cycle through the display.
The icon whose status or error message is shown is highlighted with a mauve background
Move the cursor over an icon to display its status message. Error message cycling will resume when the
cursor is no longer over an icon
2.
The left-hand side of the panel contains a series of buttons that control the contents of the main window (section
4). Click on one to access the indicated controls. The selected button is highlighted (darker) and the main panel
heading matched the button name.
3.
At the bottom are the controls for the User presets.
4.
This section contains the main operating controls and displays for managing the HCO-3931
’s feature set. The
contents are selected by clicking a button on the left-hand side of the screen.
The left side of the window, containing sections 2 and 3, can be hidden or revealed by clicking the arrow icon at the
center of the left side border.
Each of the panels associated with the groups accessed from the buttons in Section 2, and shown in Section 4, is
described individually in the following sections.
