GRASS VALLEY ATP-2000, Руководство пользователя

Страница: 39 / 90

18
Getting Started
Configure Initial Settings in the Control Screen
Configure Initial Settings in the Control Screen
The minimum initial settings needed to get started with the panel are described below.

On the ATP-2000 control screen (web page), configure the following items:
• Step 1: Network Settings
• Step 2: GV Orbit Server Settings
• Step 3: Panel Manager Settings
Step 1: Network Settings
1 In the default panel configuration, DHCP is enabled on the panel.

In this case, no further network settings action is required and proceed to Step 2: GV
Orbit Server Settings .
However,

if other, particular network settings are required then do the following:
2 Configure the unit’s network settings for the following, as required:
• DHCP or static IP address enabled; and
• for the static IP address case:
• IP Address.
• Subnet mask.
• Default gateway IP address.
3 Click Apply to apply any network settings changes.
Step 2: GV Orbit Server Settings
1 Configure GV Orbit server settings:
• GVOP Domain - GV Orchestration Protocol (GVOP) Domain number.
• GV Server IP - IP address of the GV Orbit server in the system.
• Panel Id - ‘Panel Id’ for the ATP-2000 unit in the GV Orbit system. This is a RollCall
address (for example E000:01:00) which must be unique in a system.
• Panel Name - Enter a unique and meaningful ‘Panel Name’ for the ATP-2000 unit in
the system (for example, ‘Eng GV Panel’).
• Optionally, enter:
• Location - A location for the panel (for example, ‘Studio A’); and
• Notes - Any operational, informative notes to accompany the panel.
2 Click Apply to apply the server settings.
Note: An ATP-2000 panel is discoverable by the GV Orbit Client, if multicast
network traffic is enabled and is visible to both the Client and the
panel. See
ATP-2000 Software Release Notes for IP port information.
(See Related Documentation , on page iii.)
Note: Panel Name will identify the panel, for example, in the Network
window of GV Orbit Client.