GRASS VALLEY 8960ENC -, Инструкция по эксплуатации

Страница: 12 / 52

12 8960ENC Instruction Manual
Power Up
Power Up
The front LED indicators and configuration switches are illustrated in
Figure 5 . Upon power-up, the green PWR LED should light and the yellow
CONF LED should illuminate for the duration of module initialization.
Operation Indicator LEDs
With factory default configuration and a valid input signal connected, the
green PWR LED, the yellow AUTO, and one of the green signal standard
LEDs (525 or 625) should illuminate (refer to
Table 2 on page 13 to see the
possible operating indicator combinations).
Video input presence is indicated by the 525 or 625 LED (indicating a
525-line or 625-line input signal has been detected). The AUTO LED indi-
cates that automatic standard selection is enabled.
Figure 5. LEDs and Configuration Switches
16-position
Rotary switch
Momentary toggle switch
525 – Green LED on indicates 525-line input is present
PWR – Green LED on indicates power OK
FAULT – Red LED is off during normal operation
Ejector Tab
COMM – Yellow LED indicates communication activity
CONF – Yellow LED indicates configuration activity
Auto/Manual MODE – Yellow LED on indicates automatic input detection mode
625 – Green LED on indicates 625-line input is present
Filter – Yellow LED on indicates signal is being cross-color filtered
Module Configuration Switches and LED
GND
2nd Function
(yellow)
0642_06r1
0
1
2
3 4
5 6 7
8
9
A
B
CD
E
F