Grant External Vecta, Инструкции по установке и обслуживанию

Страница: 3 / 72

1 introduction 4
1.1 How the Condensing Wood Pellet Boiler Operates 5
1.2 Boiler Description 5
1.3 Access 5
1.4 Flue System 5
1.5 Boiler Components 6
1.6 Logo Indicator 7
1.7 Boiler Cleaning and Servicing 7
2 technical Data 8
2.1 Technical Specifications 8
2.2 Burner Settings 9
2.3 Flue Gas Analysis 9
2.4 Clearances and Dimensions 9
3 Pellet Specification 11
3.1 Pellet Specification 11
3.2 Biomass Suppliers List 11
4 installation information 12
4.1 Boiler Location 12
4.2 Regulations 12
4.3 Heating System 12
4.4 Pipework Materials 13
4.5 Connections 13
4.6 Wash System 14
4.7 Before you Commission 14
4.8 Completion 14
4.9 ‘Meter Ready’ Installations 14
5 Condensate Disposal 16
5.1 General Requirements 16
5.2 Connections 16
5.3 Pipework 16
5.4 External Pipework 16
5.5 Condensate Trap 17
5.6 Inspection and Cleaning of Trap 17
6 Sealed Systems 18
6.1 Sealed System Requirements 18
6.2 Filling the Sealed System 19
6.3 Venting the Pump 19
6.4 Pressure Relief (Safety) Valve Operation 19
7 Flue System and air Supply 20
7.1 Air Supply 20
7.2 Flue Terminal Position and Clearances 20
7.3 Flue System Specification 21
7.4 Flue System Assembly 22
7.5 Flue Testing 23
7.6 Flue Notice Plate 23
7.7 Typical Flue Systems 24
7.8 Flue System Component Dimensions 27
7.9 Flue System Components 28
8 Electrical 30
8.1 General Requirements 30
8.2 Boiler Electrical Connections 30
8.3 Remote Grant Logo Indicator Connections 31
8.4 Connecting the Power Supply 31
8.5 Heating System Controls 31
8.6 Frost Protection 31
8.7 S-plan 32
8.8 Y-plan 32
8.9 Boiler Wiring Diagram 33
9 Boiler Operation 34
9.1 General 34
9.2 Modulation 34
9.3 Automatic Cleaning 35
9.4 Boiler Control Panel 36
9.5 Boiler Setpoint Temperature 37
9.6 Service Menu (including Parameter Menu) 37
9.7 Parameter Menu 38
9.8 Boiler Operating Sequence 40
9.9 Boiler Operation Flow Chart 41
10 Side Pellet Store 42
10.1 General 42
10.2 Operation 42
10.3 Installation 43
10.4 Electrical Connections 46
10.5 Commissioning the Side Store 47
11 Commissioning 48
11.1 Equipment Required 48
11.2 Preliminary Inspection 48
11.3 Boiler 48
11.4 Hopper Lid Cut-out Switch 51
11.5 Control Settings 51
11.6 Priming the Pellet Feed Auger 51
11.7 Lighting the Boiler 51
11.8 Combustion Chamber Draught 52
11.9 Flue Gas Analysis 52
11.10 Customer Handover 52
11.11 Commissioning Report Form 52
11.12 Commissioning Check List 53
12 Servicing 54
12.1 General 54
12.2 Checks Before Servicing 54
12.3 Heating System 54
12.4 Flue System 55
12.5 Combustion Ventilation 55
12.6 Boiler 55
12.7 Burner 58
12.8 Ignition Element 59
12.9 Condensate Disposal System 60
12.10 Boiler Settings 60
12.11 Hopper Lid Cut-out Switch 60
12.12 Combustion Checks 60
13 Fault Finding 61
13.1 Fault Codes 61
13.2 Fault Details 62
14 Spare Parts 64
15 the Clean air act 1993 and 66
Smoke Control areas
16 Declaration of Conformity 67
17 Health and Safety information 68
18 Disposal and Recycling 69
19 Guarantee 70
Contents Page 3
Contents