ecocool 150R
Operating Manual
Page 10
www.grantinstruments.com
4.2.2 Refrigerated bath
Figure 3: Refrigerated bath front panel (grille removed)
Drain port and drain insert
To access the drain port, pull out the top of the front grille and lift away.
The drain port and insert allow the refrigerated bath to be emptied easily. To drain the
refrigerated bath, first remove the drain insert from the holder and connect a suitable
length of hosing to the drain insert. Have the non-connected end of tubing in a
receptacle, suitable for the liquid to be drained. Push the drain insert into the drain port
and let the liquid drain. To release the drain insert push up the grey button on the drain
port and extract the drain insert.
Liquid to be drained should not be below 10°C or above 50°C.
Although the drain has been designed for minimum leakage it is advisable to place an
absorbent cloth under the drain port to catch any drips.
Always replace the front grille after draining.
Power on/off switch and indicator
Push switch to power on and off the equipment. Blue LED will indicator power on.
Drain port
Drain insert
Power on/off
switch
Tank lid
Power Indicator
