ecocool 100R
Page 9
Operating Manual
www.grantinstruments.com
4.2.2 Refrigerated bath
Figure 3: Refrigerated bath front panel with condenser grille removed
Drain port and drain insert
To access the drain port, pull out the top of the front grille and lift away.
The drain port and insert allow convenient emptying of the refrigerated bath. To drain the
bath first remove the drain insert from the holder and connect a suitable length of hosing
to the drain insert. Place the non-connected end of tubing in a receptacle, suitable for
the liquid to be drained. Push the drain insert into the drain port and let the liquid drain.
To release the drain insert push up the grey button on the drain port and extract the drain
insert.
Liquid to be drained should not be below 10°C or above 50°C.
Although the drain has been designed for minimum leakage it is advi
s
able to place an
absorbent cloth under the drain port to catch any drips.
Always replace the front grille after draining.
Power on/off switch
Push switch to power on and off the system
Drain port
Drain insert
Power on/off
switch
Tank lid
Condenser fins
