Grant Afinia GALU430 KIT Series, Руководство по установке

Страница: 13 / 16

page 13
7 HEaLtH anD SafEty infORMatiOn
Under the Consumer Protection Act 1987 and Section 6 of
the Health and Safety at Work Act 1974, we are required to
provide information on substances hazardous to health (COSHH
Regulations 1988).
Adhesives, sealants and paints used in the manufacture of the
product are cured and present no known hazards when used in
the manner for which they are intended.
8 EnD Of LifE infORMatiOn
General
Grant Afinia radiators incorporate components manufactured from
a variety of different materials.
The majority of these materials can be recycled whilst the smaller
remainder cannot.
Materials that cannot be recycled must be disposed of according
to local regulations using appropriate waste collection and/or
disposal services.
Disassembly
There is little risk to those involved in the disassembly of this
product. Please refer to and follow the Health and Safety
Information given in these Installation User Instructions.
Recycling
Many of the materials used in Grant Afinia radiators can be
recycled, these are listed in the table opposite:
Component Material
Rediator sections aluminium
nipples iron
Seals polymer
Bushes aluminium
Wall mounting brackets Mild steel (galvanised)
Disposal
All materials other than those listed above must be disposed of
responsibly as general waste.
Section 7: Health and Safety information, Section 8:
End of Life information and Section 9: Guarantee
9 GUaRantEE
Grant Engineering (UK) Limited guarantees the manufacture
of the radiator for a period of fifteen years from the date of
installation , unless the installation was more than six months
from the date of purchase, in which case the guarantee period
will commence six months from the date of purchase, provided
that the radiator has been installed and used in full accordance
with the installation instructions provided. See main Terms and
Conditions below. This does not affect your statutory rights¹.
if a fault or defect occurs within the manufacturer’s
guarantee period
If your radiator should have a fault within the guarantee period, it
will be covered under the terms of the guarantee, providing that
the radiator has been correctly installed and commissioned by a
competent person and the fault is not due to tampering, debris,
system water contamination, misuse, trapped air or the failure of
any external components not supplied by Grant Engineering (UK)
Limited, e.g. motorised valves, etc.
This fifteen-year guarantee only applies if the radiator is
installed and used in full accordance with the installation
instructions and proof of purchase is available on request.
In the first instance
Contact your installer to ensure that the fault does not lie with the
system operation, system components or any incorrect setting of
the heating system or boiler/heat pump controls that falls outside
of the manufacturer’s guarantee otherwise a service charge could
result. Grant Engineering (UK) Limited will not be liable for any
charges arising from this process.
if a fault covered by the manufacturer’s guarantee is found
Ask your installer to contact Grant Engineering (UK) Limited
Service Department on +44 (0)1380 736920.
Remember - before you contact Grant Engineering (UK)
Limited:
• Ensure the radiator has been installed and commissioned
by a competent person in accordance with the installation
instructions.
• Ensure the problem is not being caused by the heating
system or its controls.
free of charge repairs
During the fifteen-year guarantee period no charge for parts
will be made provided that the radiator has been installed and
commissioned correctly in accordance with the manufacturer’s
installation instructions.
This guarantee does not cover any labour or associated costs
incurred in replacing a faulty radiator.
Proof of purchase must be made available to Grant Engineering
(UK) Limited on request.
Chargeable repairs
A charge may be made (if necessary following testing of parts)
if the breakdown is due to any fault(s) caused by the plumbing
or heating system, e.g. contamination of parts due to system
contamination, sludge, scale, debris or trapped air. Refer to
‘Extent of manufacturer’s guarantee’.