2
9
1.
Refer to Table 1: Use the ruler provided to measure the distance ( P ) between the end caps. Refer to actual measure
data if it is not according to datas below.
P
84"
92"
96"
100"
120"
133"
136"
145"
150"
4:3
16:9
AA
X4
3. Put the bolts through the installation brackets and fix the screen on the wall ( Figure 3 - 4 ).
1:1
106"
2332
2640
2842
2332
2640
3247
3350
2332
2516
2640
2958
3247
3350
Take out all the parts from the packaging and follow the accessories guideline to ensure you have all the parts.Installing
is as below.
Wall mouting
Warning!: Professional operator is required for screen installation.
Figure 1
Table 1: Distance(P) between the end caps
Format
Specifications
distance (mm)
distance (mm)
distance (mm)
2. According to P distance, drill 4 holes in the wall with an electric drill, and put 4 pieces of 10x40 mm expansion bolts
in the holes ( Figure 2 ).
Figure 2
Installation
Figure 3
Figure 4
Wall
Wall
Expans
ion bol
ts
Expansion bo
lts
Note: Sizes and specifications are subject to change at any time. Refer to real product for exact data.
motor limit adjusting slott
Warnings
Ignoring the safety warnings may
lead to injuries and/or damaging
the product.
Refrain from hanging anything on t he
screen as it may cause the scree n to
fall.
Do not connect any electrical
attachments or remote controls.
Fixtures should be installed in a secure
place to avoid accidents or the screen
falling.
Roll up the screen after every use.
Leaving it hanging for a long period
of time may cause the fabric to loosen.
Please contact your local dealer for
repair s or maintenance. Please contact
our company if you have any further
questions. Avoid taking apart the
fixtures yourself. Loose parts may
cause the screen to fall.
Do not take apart and replace with unknown parts. If there are any problems, please contact your local dealer.
Product specifications are subject to change.
The ceiling or wall used for fixture installation must be secure to prevent the screens from falling.
While installing electrical motors, please hire professionals or your local dealer to ensure safety. A misconnection
may lead to fire or leaks.
Make sure the Fixing screw be fastened when using the wall bracket, to avoid any damage.
Keep all infrared wireless products away from fluorescent lighting as it may cause malfunctions.
Please read the following as any damage to the screen surface will affect the quality of the picture:
1.Avoid contact or touching the screen surface as it may cause scratches or tears.
2.Do not write or draw on the surface.
3.Clean the screen with a soft cloth and lukewarm water. Do not use any detergent or cleaning products.
Roll up the screen after every use. Ensure that the screen is level when installing; do not pull on the sides or fold
the screen.
To prevent unnecessary damage, the operating and maintenance of the screen should be done by adults.
Attention:
> Please make sure there is no dust or dirt on the fabric surface before rolling it back to the casing
> The recommened working time is less than 50 seconds. The motor will enter overheating protection
status and stop working for every continuous 4 minuters operation, user would need to wait for a
while until the motor cool down before operating again.
> There is no lube needed for the motor. Please be noticed that the appropriate setting is optimized which
requires no further adjustment, please consult the after sales team before adjusting the limits.
