P a g e
|
59
UCM630xA Series User Manual
Version 1.0.9.10
Saving and Applying Changes
After making changes to a page, click on the "Save" button to save them and then the "Apply Changes" button
that finalizes the changes. If a modification requires a reboot, a prompt will appear asking to reboot the device.
Setting Up an Extension
Power on the UCM630xA and your SIP endpoint. Connect both devices to the same network and follow the steps
below to set up an extension.
1.
Log into the UCM web portal and navigate to
Extension/Trunk
Extensions
2.
Click on the "Add" button to start creating a new extension. The Extension and SIP/IAX Password
information will be used to register to this extension. To set up voicemail, the Voicemail Password will
be required.
3.
To register an endpoint to this extension, go into your endpoint's web UI and edit the desired account.
Enter the newly created extension's number, SIP user ID, and password into their corresponding fields
on the endpoint. Enter the UCM's IP address into the SIP server field. If setting up voicemail, enter *97
into the Voice Mail Access Number field. This field may be named differently on other devices.
4.
To access the extension's voicemail, use the newly registered extension to dial *97 and access the
personal voicemail system. Once prompted, enter the voicemail password. If successful, you will now
be prompted with various voicemail options.
5.
You have now set up an extension on an endpoint.
