P a g e
|
170
UCM630xA Series User Manual
Version 1.0.9.10
Create New IAX Extension
The UCM630xA supports Inter-Asterisk eXchange (IAX) protocol. IAX is used for transporting VoIP telephony
sessions between servers and terminal devices. IAX is like SIP but also has its own characteristic. For more
information, please refer to RFC 5465.
To manually create new IAX user, go to Web GUI
Extension/Trunk
Extensions
. Click on "Add" and a new
dialog window will show for users which need to make sure first to select the extension type to be IAX Extension
before proceeding to fill in the extension information. The configuration parameters are as follows.
Table 43: IAX Extension Configuration Parameters
Basic Settings
General
Extension
The extension number associated with the user.
CallerID Number
Configure the CallerID Number that would be applied for outbound calls from this
user.
Note:
The ability to manipulate your outbound Caller ID may be limited by your
VoIP provider.
Privilege
Assign permission level to the user. The available permissions are "Internal", "Local",
"National" and "International" from the lowest level to the highest level. The default
setting is "Internal".
Note:
Users need to have the same level as or higher level than an outbound rule's
privilege to make outbound calls using this rule.
SIP/IAX Password
Configure the password for the user. A random secure password will be automatically
generated. It is recommended to use this password for security purpose.
Voicemail
Configure Voicemail.
There are three valid options and the default option is "Enable Local Voicemail".
Disable Voicemail
: Disable Voicemail.
Enable Local Voicemail
: Enable voicemail for the user.
Voicemail
Password
Configure voicemail password (digits only) for the user to access the voicemail box.
A random numeric password is automatically generated. It is recommended to use
the random generated password for security purpose.
