GAC2570 User Manual
Version 1.0.1.23
P a g e
|
164
configs in the order of cfgMAC, cfg.xml, cfgMODEL.xml, cfgMAC.xml.
Config Provision
The device will download the configuration files and provision by the
configured order. Use arrow buttons to add and order configuration files.
PNP Feature
Enable PNP Feature
Sets the device to broadcast the SIP SUBSCRIBE message during booting
up to allow itself to be discovered and be configured by the SIP platform.
The default setting is "Yes".
Note:
Reboot to take effect.
PNP URL
Configures the PNP file server URL. Users should input transport protocol
in URL such as HTTP/HTTPS/TFTP. You could also set the device to be
the file server. The format is http://192.168.121.111/pnp. In this case, you
have to copy your cfg file to the device /sdcard/pnp directory.
PNP (3CX) Auto
Provision
If enabled, the GAC2570 will send SUBSCRIBE request for automatic
assigned URL to the multicast address in LAN when bootup to accomplish
automatic configuration of SIP account, It requires 3CX server support.
Advanced Settings
Send HTTP Basic
Authentication By
Default
Determine whether to send basic HTTP authentication information to the
server by default when using wget to download firmware or config file.
•
If set to "Yes", send HTTP/HTTPS user name and password no
matter the server needs authentication or not.
•
If set to "No", only send HTTP/HTTPS user name and password
when the server needs authentication.
Enable SIP NOTIFY
Authentication
Enables the SIP NOTIFY Authentication on the device.
If set to “Yes”, the GAC2570 will challenge NOTIFY with 401.
The default setting is “Yes”.
Enabled Authentication
Server Validation
Configures whether to validate the server certificate when downloading the
firmware/config file.
If set to "Yes", the device downloads firmware/configuration files only from
servers validated by CA certificates.
The default setting is
“No”.
CA Certificate
Select the CA certificate for server verification.
Press
“Manage” to upload custom CA.
User Certificate
Select the user certificate to be used for mutual server authentication. If
the private key is included, upload it with the user certificate.
Press
“Manage” to upload User Certificate.
Factory Reset
Resets the device to the default factory setting mode.