GAC2570 User Manual
Version 1.0.1.23
P a g e
|
160
Enable Contact Full
Indicator
If set to "Yes", the LED indicator on the upper right corner of the GAC2570
will light up when the contact storage or message storage is full.
Enable Indicator When
LCD is Off
If set to "Yes", the LED indicator on the upper right corner of the GAC2570
will light up when the LCD screen is off.
TR-069
Enable TR-069
Sets the device to enable the “CPE WAN Management Protocol” (TR-069).
The default setting is "No".
Note
:
Reboot the device to make changes take effect.
ACS URL
Specifies URL of TR-069 ACS (e.g.,
), or IP address.
ACS Username
Enters username to authenticate to ACS.
ACS Password
Enters password to authenticate to ACS.
Enable Periodic Inform
Enables periodic inform. If set to "Yes", device will send inform packets to
the ACS. Default is “No”.
Periodic Inform Interval
(s)
Configures to sends periodic “Inform” packets to ACS based on specified
interval. The default setting is 86400.
Connection Request
Username
Enters username for the ACS to connect to the device.
Connection Request
Password
Enters password for the ACS to connect to the device.
Connection Request
Port
Enters the port for the ACS to connect to the device. The default setting is
7547.
CPE CA Certificate
Select the CA certificate for server verification.
Press
“Manage” to upload CA certificate.
CPE User Certificate
Select the user certificate to be used for mutual server authentication. If
the private key is included, upload it with the user certificate.
Press
“Manage” to upload User Certificate.
Maintenance Page Definitions
Upgrade
Firmware
Upgrade via Manually Upload
Complete Upgrade
If enabled, all files will be replaced except user data.