GAC2570 User Manual
Version 1.0.1.23
P a g e
|
152
(Ethernet)
Layer 2 QoS 802.1p
Priority Value (Ethernet)
Assigns the priority value of the Layer 2 QoS packets for Ethernet.
The Default value is 0.
IPv6
IPv6 Address
Configures the appropriate network settings on the device. Users could
select from "Auto-
configured" or “Statically configured”.
Preferred DNS Server
Configures the Preferred DNS Server.
Static IPv6 Address
Enter the static IPv6 address in "Statically configured" IPv6 address type.
IPv6 Gateway
The static gateway when static IPv6 is used.
IPv6 Prefix Length
Enter the IPv6 prefix length in "Statically configured" IPv6 address type.
Default is 64.
DNS Server 1
Configures the primary DNS IP address.
DNS Server 2
Configures the secondary DNS IP address.
802.1x Mode
802.1x mode
Enables and selects the 802.1x mode for the device. The supported 802.1x
modes are:
EAP-MD5, EAP-TLS
and
EAP-PEAP.
The default setting is "Disable".
802.1x Identity
Enters the identity information for the selected 802.1x mode.
(This setting will be displayed only if 802.1 X mode is enabled).
802.1x Secret
Enters the secret for the 802.1x mode. This option will appear when 802.1x
mode is EAP-MD5 or EAP-PEAP.
CA Certificate
Uploads the CA Certificate file to the device. (This setting will be displayed
only if the 802.1 X mode is enabled)
Client Certificate
Loads the Client Certificate file to the device. (This setting will be displayed
only if the 802.1 X TLS mode is enabled)
Private Key
Loads the private key file to the device. (This setting will be displayed only
if the 802.1 X TLS mode is enabled)
Wi-Fi Settings
Connect to Wi-Fi Network
Users can connect wirelessly to a network using Wi-Fi under
GAC2570 Web GUI
→
Network Settings
→
Wi-Fi Settings.
In order to connect to a network using Wi-Fi, please, refer to the following steps:
1.
Go to
GAC2570 Web GUI
→
Network Settings
→
Wi-Fi Settings
→
Wi-Fi Basics.
2.
Enable
Wi-Fi Function
by turning the option on.
