The drum is blocked with two brackets on the front side and with other two brackets on the rear to prevent
damaging the appliance structure during transport.
To access these brackets, take off the panels as indicated previously and remove the brackets highlighted
with a general danger triangular sticker.
Attention!
•
Disassemble the transport bracket before starting the appliance.
•
Starting the appliance with the transport bracket still mounted can
damage the appliance and cause injuries to personnel.
•
Remove only the transport brackets.
•
Do not transport the appliance without the transport brackets.
4.7
REMOVAL OF THE TRANSPORT BRACKETS
For transport reasons, the appliance is blocked to prevent any movement of the washing unit.
Once you have removed the transport brackets, reassemble all the previously removed panels.
Store the transport brackets for any future transport of the appliance.
Attention!
•
DO NOT start the appliance or adjust the imbalance micro
switch before having removed the brackets.
Once the transport brackets have been removed from the appliance and it has been installed on a levelled
surface, the imbalance micro switch must be adjusted.
This safety device prevents excessive imbalance of the drum-tub unit during not perfectly balanced spin
phases.
Adjust the device as indicated in the figure to guarantee proper operation of the appliance. The elastic rod
that detects any imbalance of the drum-tub unit must be positioned in the centre and lower than the window
that determines the maximum excursion.
Attention!
•
To carry out this operation, the drum must be empty and the
appliance must be installed in its definitive position.
•
Adjust this device every time the appliance must be moved.
4.8
ADJUSTING THE IMBALANCE MICRO SWITCH
