Grand ranger R380, Руководство пользователя

Страница: 27 / 73

OPERATING THE CRAFT
27 Ranger R380, R420, R460 Owner’s Manual
−
Insert the first section (the section number is
applied on the section upper surface) as far as
possible into the bow angle.
−
Insert the transom section (last section) between
the stops provided on the transom as show on
fig. 5.
−
Set the removable H-shaped stops in the cut-
outs provided on the sections and fit all section
together as show on fig. 5.
Fig. 5. How to assemble a floor. Step 1.
−
Check that all section and H-shaped stops are
correctly aligned.
−
Make sure that the edges of the remaining
sections fall within the folding line of the balloon
and bottom connecting tape.
−
To flattening floor apply the force to the sections
connecting zone apex as show on fig. 6.
Fig. 6. How to assemble a floor. Step 2.