Grand Design Solitude 2017, Руководство пользователя

Страница: 90 / 204

88
Lippert Ground Control 3.0 System, Continued
(Equipped on the S-Class)
Note : If the AUTO LEVEL sequence does not perform as de-
scribed, place the system in manual mode and test that the
jacks operate correctly by pushing their coordinating buttons
on the touch pad; i.e."FRONT" button operates only the front
jacks, etc.
Hitch Recognition
1. Turn on the touch pad.
2. Push the UP arrow (Fig. 5A) to scroll to
Auto Reconnect option on LCD screen.
3. Push ENTER (Fig. 5B). The rear jacks and middle
jacks (if equipped) will retract first, then the front jacks
will extend to raise the trailer to the height where the
auto level sequence was started.
NOTE:
If the auto level sequence was started with the front
of the trailer in a below-level condition, the Hitch Recognition
will not function and the LCD will display Feature Disabled. In
order for the Hitch Recognition feature to function, the auto
level sequence MUST be started with the front of the trailer
above level.
Once the RV is stabilized, continue setting up the RV by con-
necting to the site facilities, extending the slideouts, etc.,
according to your personal preferences and needs. There is
no particular order to set up procedures. With practice you will
find the order that is the most efficient for your needs.
Preventive Maintenance
1. For optimum performance, the system requires full
battery current and voltage. The battery MUST be
maintained at full capacity.
2. Check the terminals and other connections at the battery,
the controller, and the jacks for corrosion and loose or
damaged connections.
3. Remove dirt and road debris from jacks as needed.
4. If the jacks stay in the extended position for long periods
they require protection from the elements. Spray the
exposed leveling jack rods with a silicone lubricant every
3 months. If the trailer is located in a salty environment,
spray the rods every 4-6 weeks.
Towing & Leveling