In the
Ch 3 Menu
shown below, set the following parameters:
•
Ch 3/4 Mode
- set the operating modes for Channels 3 and 4.
Choose from
2-Channel
(Ch 3 and 4 will be independent),
Stereo
(Ch 3/4 will be a
stereo pair) or
Quad Tracking
(Ch 1-4 will track together). Note that if you have
set Ch 1/2 to
Quad Tracking
or the
Quad On
function is enabled on the
Quad
Menu
, this selection will default to
Quad Tracking
.
•
Ch 3 Digital Ref
- sets the Digital Output Reference level for Channel 3 (in
2-Channel
mode). If
Ch 3/4 Mode
is set to
Stereo
, adjustment will affect the
stereo pair, or if set to
Quad Tracking
, adjustment will affect all channels.
•
Ch 3 Analog Ref
- sets the Analog Input Reference level from -10dBu to +8dBu (in
0.5dBu steps) for channel 3 only (in
2-Channel
mode). If
Ch 3/4 Mode
is set to
Stereo
, adjustment will affect the stereo pair, or if set to
Quad Tracking
, adjust-
ment will affect all channels.
Refer to the
Sampling Frequency
,
Clip Domain
,
Ref Level
and
D Clip
indicator
descriptions in the
Channel 1
menu.
Model 6010 Four Channel 20-bit Audio ADC
6010-14
