In the
Ch 2 Menu
shown below, set the following parameters:
•
Ch 1/2 Mode
- set the operating modes for Channels 1 and 2.
Choose from
2-Channel
(Ch 1 and 2 will be independent),
Stereo
(Ch 1/2 will be a
stereo pair) or
Quad Tracking
(Ch 1-4 will track together). Note that if you have
set Ch 3/4 to
Quad Tracking
or the
Quad On
function is enabled on the
Quad
Menu
, this selection will default to
Quad Tracking
.
•
Ch 2 Dig Ref
- When
Ch 1/2 Mode
is set to
2-Channel
, this will adjust Channel
2 Digital Output Reference level only. If
Ch 1/2 Mode
is set to
Stereo
, adjustment
will affect the stereo pair, or if set to
Quad Tracking
, adjustment will affect all
channels.
•
Ch 2 Analog Ref
- When
Ch 1/2 Mode
is set to
2-Channel
, this will adjust
Channel 2 Analog Input Reference level only. If
Ch 1/2 Mode
is set to
Stereo
,
adjustment will affect the stereo pair, or if set to
Quad Tracking
, adjustment will
affect all channels.
In this menu, the indicator descriptions are identical to
Channel 1
on the previous page.
Model 6010 Four Channel 20-bit Audio ADC
6010-13
