Avenue Touch Screen Remote Configuration
Avenue Touch Screen remote control menus for this module are illustrated and explained
below. Refer to the
6010 Parameter Table
shown previously for a summary of available
parameters that can be set remotely through the menus illustrated. For more information
on using Avenue Touch Screen, refer to the Avenue Touch Screen data pack that came with
the option.
6010 Avenue Touch Screen Menus
In the
Ch 1 Menu
shown below, set the following parameters:
•
Ch 1/2 Mode
- set the operating modes for Channels 1 and 2.
Choose from
2-Channel
(Ch 1 and 2 will be independent),
Stereo
(Ch 1/2 will be a
stereo pair) or
Quad Tracking
(Ch 1-4 will track together). Note that if you have
set Ch 3/4 to
Quad Tracking
or the
Quad On
function is enabled on the
Quad
Menu
, this selection will default to
Quad Tracking
.
•
Ch 1 Digital Ref
- sets the Digital Output Reference level to match the studio
reference for channel 1 (in
2-Channel
mode), Ch 1/2 if in
Stereo
mode or all four
channels together if in
Quad Tracking
mode.
•
Ch 1 Analog Ref
- sets the Analog Input Reference level from -10dBu to +8dBu (in
0.5dBu steps) for channel 1 only (in
2-Channel
mode), Ch 1/2 if in
Stereo
mode or
all four channels if in
Quad Tracking
mode.
In all channel menus, the following indicators are available:
•
Sampling Frequency
- will indicate what frequency the module is locking to,
either
External Lock
or
48kHz
(internal).
•
Clip Domain
- will indicate where clipping will occur (in the analog or digital
domain).
•
Ref Level
- illuminates green when signal is reaching the Digital Output
Reference level chosen.
•
D Clip1
- Black indicates signal is below digital clipping; Red indicates digital
signal is clipping. A grayed out box indicates that digital clipping cannot occur and
analog clipping will not be indicated.
Model 6010 Four Channel 20-bit Audio ADC
6010-12
