LX_FR566DG-INS-LAB-RevK21 14
Heat and Massage Feature —
Control Module and Transformer Unit
Showing All Connections Correctly Made
Handheld
Pendant
Connector
Heat & Massage
Connectors
Power Cord
Connector
Handheld
Pendant
Connector
Heat Only
Connectors
Power Cord
Connector
Heat Only Feature —
Control Module and Transformer Unit
Showing All Connections Correctly Made
2. The Control Module and Transformer, shown above, are contained in a single unit mounted in
the back compartment. The 8-foot power cord plugs into the wall AC outlet.
Heat and Massage / Heat Only Installation Instructions
1. Place the back cushion over the vertical bayonet lugs of the recliner mechanism. Secure
the back on each side with the threaded screw knobs per the previous
Upholstered Back
Assembly
instructions.
Raise Back to Access
Back Compartment
Similar Model’s Back
Shown Properly
Installed
Handheld Pendant
Storage Bracket
2. Raise the back skirt on the lower rear of the back cushion, as shown at left above, and use
masking or packaging tape to temporarily secure it up and out of the way. This will permit
uninterrupted access to the back compartment while making the cable connection.
3. Remove the handheld pendant and power cord from the back compartment. Place the
handheld pendant in the storage bracket shown at right above.
