LX_FR566DG-INS-LAB-RevK21 13
RECLINERS WITH HEAT AND MASSAGE OR HEAT ONLY FEATURE
HEAT AND MASSAGE: FR566GH / FR566DGH; HEAT ONLY: FR566GHO / FR566DGHO
INSTALLATION AND OPERATING GUIDE
Tools required: masking or packaging tape
WARNING: Important! Read and understand these instructions before assembling or
using the Specialty Healthcare Seating Heat and Massage / Heat Only Unit. If you do not
understand any part of these warnings, cautions or instructions, contact a healthcare
professional for direction in the use of this product. If the Heat and Massage / Heat Only
Unit is not properly assembled, personal injury and damage to the Heat and Massage / Heat
Only Unit could result.
WARNING: The recliner seat and back heating elements are wired to operate in series only.
Do not change the system wiring in any way.
WARNING: If components are damaged or missing, contact your Graham-Field authorized
distributor immediately. DO NOT use substitute parts. Use only Lumex replacement parts.
The use of non-Lumex replacement parts could cause personal injury, property damage,
and void the warranty.
WARNING: GF Health Products, Inc. assumes no responsibility for any damage or injury
caused by improper assembly or use of this product.
Description
The Lumex Healthcare Seating Heat and Massage / Heat Only Unit is a low-voltage (12V) Heat and
Massage / Heat Only Unit, controllable by the user and / or caregiver via a handheld pendant. It
is designed to enhance the comfort of the patient / resident during the use of Lumex Clinical Care
Recliners. The Heat and Massage Unit offers three levels of seat and back heat, as well as a gentle
or firm massage function for just the lower back or both lower and upper back; the Heat Only Unit
offers three levels of seat and back heat.
Connection
The Heat and Massage Unit comes pre-installed in Lumex Clinical Care Recliners with the Heat
and Massage Option (FR566GH and FR566DGH); the Heat Only Unit comes pre-installed in Lumex
Clinical Care Recliners with the Heat Only Option (FR566GHO and FR566DGHO). During recliner
shipment, the Heat and Selector Switch connections are disconnected. One connection at the
control box is required to make the unit functional.
Main Components
1. All Heat and Massage / Heat Only functions are controlled
by the handheld pendant.
The handheld pendant comes pre-installed and is shipped
within the back compartment. To store the pendant when
not in use or for caregiver use, place it in the pendant
storage bracket mounted on the back of the recliner as
shown at right.
Handheld Heat and Massage
Pendant Shown in Storage Bracket
on Back of Recliner