Graham Architectural Products
Homeowner’s Manual
Acoustical Aluminum Windows
8
Photo 11
Remove Balance Hook
With
Screwdriver
SERIES 2400
DOUBLE HUNG WINDOW
3.
Disconnect balance hook from jamb using a flat blade screw driver
(Photo 11).
4.
To install a new balance, place the hook through the slot in jamb and push balance down until top
of balance is below the clip. Allow balance to slide up and engage the bottom of the balance clip
(Photo 12)
.
Cleaning and Lubricating of Jamb Track
1.
We recommend that the balance tracks be cleaned and lubricated at least once a year.
2.
To clean, use a mild, non-abrasive cleaner and wipe down the interior and exterior track pockets
in both the jamb balance track from top to bottom
(Photo 13)
.
3.
Dry the track with a clean, dry cloth.
4.
Lubricate by spraying the entire length of the jamb tracks with silicone spray lubricant. A pure,
non-petroleum base silicone spray is recommended
(Photo 14)
.
Photo 12
Balance Engaging In Relea
se Clips
Photo 13
Keep Jamb Tracks Clean
Photo 14
Use Non-petroleum Base Silicone
To Lubricate Jamb Tracks
