Graham Architectural Products
Homeowner’s Manual
Acoustical Aluminum Windows
10
Photo 21
Press New Wheel In Place
Photo 22
Remove Two Screws To Replace Wheel Housing
Photo 18
Rollers Are On
Bottom
Photo 19
Align Bottom Rail With Sill S
ash
Photo 20
Remove Roller With Flat Blade Screwdriver
SERIES 0400
HORIZONTAL SLIDING WINDOW
Sash Replacement
1.
To replace the sash, the reverse order for the removal is followed (#
4, # 3, # 2, and # 1).
2.
Insert top rail of sash # 4 into frame head.
Note: Make sure the sash is in the correct orientation; the rollers
are on the bottom rail of the sash (Photo 18).
3.
With the top rail engaged into the head, align the bottom rail of the
sash with the sill sash track
(Photo 19)
.
4.
Lower the sash into the track and slide sash to check proper alignment.
5.
Repeat steps 2-4 for the remaining sash in the order described above.
Replacing Sash Rollers
1.
Use a narrow flat blade screw driver.
Insert blade under the wheel and
gently pry the wheel out of housing
(Photo 20)
.
2.
Place new wheel assembly in the
provided slot and press into place
(Photo 21)
.
3.
To replace entire wheel housing,
simply remove the two sash assembly
screws located inside the housing and slide the housing out of
the rail
(Photo 22)
.
4.
Insert the new wheel housing and align sash assembly screw
holes.
5.
Insert screws and tighten.
6.
If wheel assembly is not previously installed, place the assembly
into the housing at this time.
7.
Return the sash to the frame as described under sash
replacement.
