Graham Architectural Products
Homeowner’s Manual
Acoustical Aluminum Windows
18
Photo 39
Turn Screw Counter-Clockwise To Lower Panel
MAINTENANCE INSTRUCTIONS
SERIES 0800
SLIDING GLASS DOOR
Adjusting Panel Rollers:
1.
Each roller height may be adjusted up or down to square
the panels to the jamb or interlock.
2.
An adjustment screw is located at lower corners of each
panel. The adjustment screw is the lower screw
(Photo
38)
.
3.
Using a large Phillips screwdriver, turn the screw
clockwise to raise the panel and counter-clockwise to
lower
(Photo 39)
.
Note: It may be
necessary to lift the
panel and take some
of the weight off the
rollers while adjusting.
Operable Panel Removal
Note: Two people are recommended for removing and
installing panels.
1.
Open Operable Panel partially.
2.
Lower the panel as low as possible by adjusting the panel rollers (turn screw counter-clockwise).
3.
Slide door panel to the
full open position
, but allow clearance for hands to grip sides.
4.
Grasp both stiles and carefully raise panel into head pocket
(Photo 40)
.
Photo 38
Roller Adjustment Screw
Photo 40
Grasp Side Rails And Lift Into Head
