gmb / BA PowerGear_EN as of May 2015 / 29.10.2015
Page 15 of 23
7.6 Finishing work
- Before fitting protective covers check again the correct oil level in the gear unit.
- Check for even running free from strains, stresses and any faults.
- Fit protective covers.
- Carefully clear away all tools as well as any parts not fitted.
Attention
:
Due to
incorrect installation
the gear unit can be damaged and become unusa-
ble. Such damage may be caused by falling objects, dumping, welding work or
insufficient attachment.
Due to incorrect installation the gear unit can be damaged and become unusable.
Such damage may be caused by falling objects, dumping, welding work or insuf-
ficient attachment.
The operator must ensure:
The gear unit must be protected against any falling objects and dumping.
Welding work must not be carried lout on any part of the drive.
The gear unit must not be used as a ground point for electric welding work.
All mounting options assigned to the build type must be used.
Any screws that have become unusable during assembly and disassembly must be
replaced by new ones featuring the same design and strength class.
Attention
damage to gear unit:
Impacts or shocks during the mounting of the coupling may cause damage inside
the gear unit.
Fit couplings with pull-on devices.
The shaft seal rings and the running surfaces of the shafts must not be damaged
when fitting the coupling parts.
