Grady-White Boats EXPRESS 360, Руководство пользователя, Страница: 93 / 136

3 6 0 E
X P R E S S
8–27
3. To flush, depress the flush lever sharply until contents clear the bowl. A sharp popping noise
is normal when the vacuum seal is broken and flushing begins. Be sure to hold the lever
down for 3 seconds.
Located on the outboard head wall is a monitor which displays the fill level of the holding
tank. When the tank is filled, it can be discharged overboard or emptied through the deck
pump-out fitting. Following are instructions on both operations:
Overboard Discharge
1. Open the discharge seacock located under the aft berth subfloor with the disch. I.D. tag. This
seacock must be open prior to discharge to prevent damage to the discharge pump. To
access, take out the center cushion and remove the compartment cover board.
2. Supply power to the pump at the DC panel using the switch labeled holding tank discharge.
3. Engage the pump using the key switch in the Tank Manager panel on the outboard head
wall. Turn the switch to the start position momentarily and release. The key will return to
the “auto-off” position. The discharge pump will run until the Tank Manager panel indicates
the tank is empty and turn off automatically.
4. Turn the key to the “off” position.
5. Close the discharge seacock when the tank is empty.
Deck Pump-out
1. Remove the cap from the deck pump-out fitting located in the starboard walk around.
2. Connect a vacuum hose from a pump-out station to the deck fitting and run until the tank is
empty. Replace the cap on the deck pump-out fitting.
See “VacuFlush® Head Layout” on page 8–34 for a layout diagram.
N O T I C E
Do not dispose of sanitary napkins or other non dissolving items in the toilet. Also, do not attempt
to flush facial tissue, paper towels, or large quantities of toilet paper.
C A U T I O N
Overboard discharge seacock must be sealed and secured in the closed position in accordance
with the laws in your boating area.
!