Set Up
8
3A4349B
Set Up
NOTE:
For letter references, see the
Component
Identification
section, starting on page 5.
1.
Assemble the drive/mix shaft (D) into the hopper
and engage the flat end as shown below into the
slot of the rotor (RS).
A
2.
Slowly swing the motor assembly toward its closed
position, stopping shortly before the motor shaft
adapter (MS) and drive/mix shaft (D) touch.
3.
Make sure the motor shaft adapter (MS) and
drive/mix shaft (D) are aligned so the drive shaft flat
slides into the motor shaft adapter slot. If they do not
align, rotate them into position.
4.
Swing the motor completely shut and lock it in place
with the motor latch (K).
WLD
'
56
WLD
06
'
/
WLD
'
06
WLD
.
Содержание ToughTek MP40
Страница 26: ...Parts 26 3A4349B MP 20 and MP 40 Series Parts continued WL D Apply pipe sealant to pipe threads 8...
Страница 32: ...Parts 32 3A4349B Drive Shaft Ref 7 MTA712 for MP 20 MP 20 16A MTA713 for MP 40 MP 40 380V 07 BWL D 07 BWL D...
Страница 37: ...Notes 3A4349B 37 Notes...
Страница 43: ...Dimensions for all models 3A4349B 43 Dimensions for all models WL D 53 134 cm 64 163 cm 45 5 116 cm 32 25 82 cm...
