Graco ToughTek MP40, Руководство по эксплуатации

Страница: 19 / 48

Operation
3A4349B 19
Routine Maintenance
The following maintenance should be
performed daily:
1. Flush the system (see Flush , page 12).
2. Perform the Pressure Relief Procedure , page 8.
3. Clean the hopper with a scrub pad. It is recom-
mended that you clean the outside of the sprayer
with a cloth and water.
4. Check the pump, seals, hoses, couplings, and
cables for wear and damage. Replace if necessary.
5. Grease seals daily via the grease fitting (GF)
located on the motor flange. Use water resistant,
corrosion inhibited grease.
NOTICE
Failure to clean properly after use will damage seals
and moving parts due to wear from material build-up.
To avoid damage, properly clean the unit after each
use.
WLD
*)
*)