manualshive.com logo in svg

Graco Therm-O-Flow 194485, Инструкция-перечень запасных частей

Поделиться
Скачать
Graco Therm-O-Flow 194485 Скачать руководство пользователя страница 5

310538     5

WARNING

FIRE, EXPLOSION, AND ELECTRIC SHOCK HAZARD

Improper grounding, poor air ventilation, open flames, or sparks can cause a hazardous condition
and result in fire or explosion and serious injury.

D

Ground the equipment and the object being sprayed. The Automatic Dispense Valve is
grounded through proper connection of pin E inside the electrical control panel to truth earth
ground inside the electrical control panel.  See Grounding  on page 9.

D

Ground the equipment and the object being sprayed, and all other electrically conductive
objects in the dispense area. Proper grounding dissipates static electricity generated in the
equipment. See Grounding  on page 9.

D

Do not use this equipment with flammable liquids.

D

Keep the dispense area free of debris, including solvent, rags, and gasoline.

D

If there is any static sparking or you feel an electric shock while using the equipment, stop dis-
pensing immediately.  Do not use the equipment until you have identified and corrected the
problem.

D

Make sure all electrical work is performed by a qualified electrician only.

D

Have any checks, installation, or service to electrical equipment performed by a qualified electri-
cian only.

D

Make sure all electrical equipment is installed and operated in compliance with applicable
codes.

D

Make sure power is disconnected when servicing and repairing equipment.

D

Before operating the equipment, extinguish all open flames or pilot lights in the dispense area.

D

Do not smoke in the dispensing area.

D

Keep liquids away from the electrical components

D

Disconnect electrical power at the main switch before servicing the equipment.

D

Never exceed maximum wattage of the supply unit.

TOXIC FLUID HAZARD

Hazardous fluids or toxic fumes can cause serious injury or death if splashed in the eyes or on the
skin, swallowed, or inhaled.

D

Provide fresh air ventilation to avoid the buildup of vapors from the fluid being dispensed.

D

Know the specific hazards of the fluid you are using.

D

Store hazardous fluid in an approved container. Dispose of hazardous fluid according to all
local, state and national guidelines.

D

Always wear protective eyewear, gloves, clothing and respirator as recommended by the fluid
and solvent manufacturer.

D

Avoid exposure to heated material fumes.

Содержание Therm-O-Flow 194485

















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды