Graco TexSpray 248091, Операция и комплектующие

Страница: 10 / 24

Spray Techniques
10
4 To select correct nozzle for
your applications, consider
size of aggregate in material
and coarseness of spray pat-
tern. Remember the larger the
nozzle, the larger the pattern.
See
Nozzle Selection , page
7.
• More air produces a finer finish,
less air a coarser finish.
When adjusting flow adjustment
nut (B), release trigger (C), then
adjust.
If adjusting while triggered,
needle will turn but provide no
adjustment.
If flow adjustment nut will not
turn, check to see if it is:
• set to maximum adjustment, or
•
if there is material on threads.
Clean threads as needed.
Check material consistency
often. Material may thicken as it
sits and slow down production or
affect spray pattern. Thin with
water as needed to maintain
proper consistency.
4
4
C
B
ti4338a