Display
3A6884B
17
Change Display Units
NOTE:
To change display units you must be
in the pressure screen with the pressure
display at zero.
1.
Press and hold the Display Button for
5 seconds to change pressure units (psi,
bar, MPa) to desired units. Selection of
bar or MPa changes gallons to liters x 10.
Select Control Device
1.
Short press Display Button three times to
move to
SELECT CONTROL DEVICE
mode.
2.
Press the Advance Switch on desired
control device to select it. Options
available are:
a.
Manual Advance Switch.
b.
Corded Pendant.
c.
Wireless Pendant.
NOTE:
The TSP power pack may be paired
with only one control at any time. Any
previously selected devices will be ignored
when a new device is selected.
